BILLET CUTTING  

Baraldi Billet Cutting Lubricants Are designed to ensure the Billet is ready for cutting after heating and before extrusion 

 

STAG 40/BC/2

 

Advantages 

• Completely free of mineral oil and Chlorine additives 

• Is fully biodegradable 

• Suitable for both cols and hot cutting 

• Excellent to recover chips and scraps for Repossessing

​

PISTON / DUMMY BLOCK

​Baraldi Piston / Dummy Block lubricants meets the following requirements:

 

• Good adhesion to the billet

• Good anti-adherent power

• No hazardous fumes or vapors

• Non-Flammable at working temperature

• Does not accumulate on the slide

• Does not make the floor slippery

• Without environmental impact

 

STAG 11

 

Water based release agent for Extrusion of metals and alloys

  

ADVANTAGES

 

Innovative Lubricant in aqueous solution, approved by both extruders and OEM. Formulated on the basis of synthetic active components.

 

• Excellent adhesion and filming capacity on surfaces with temperatures above 400 degrees Celsius

• Excellent release / anti-sticking action

• Non-flammable non-harmful

• Free of oil does not develop harmful fumes or vapors

• No nozzle clogging, easy washable

• Cleanliness of floor and profiles 

​

Case Study on the health benefits of replacing Boron Nitride powder with Stag 11

 

SHEAR

​

Baraldi Shear lubricants are designed to lubricate and protect in high temperature and friction conditions

 

Baraldi lubricants meet the following requirements:

 

• Good adhesion to treated surfaces

• Maximum lubricating and anti-seizing power

• High flash point

• Without impact on operators and environment

 

STAG RP/1

 

Innovative water-soluble product for Butt-shear and saw in Extrusion of metal alloys

 

​ADVANTAGES

•  Very high lubricating and anti-seizing power

• Low risk of flammability

• Reduced harmfulness

• Water content allows it to have cooling properties

 

  

STAG 98/AL

 

Innovative neat oil. Anhydrous lubricant for the extrusion of Aluminium alloys

  

ADVANTAGES

• 100% synthetic

• High flash point

• Without labeling

 

PROFILE CUTTING

Baraldi Profile Cutting Lubricants are developed to ensure no residue of the lubricants remain on the profiles after heat treatment

 

STAG 15/PC

Special lubricant for Aluminium extruded profile cutting

 

​ADVANTAGES

• Made of specially selected raw materials of mineral origin

• Reduces oil and carbon residues on the profile after heat treatment

 

​ 

STAG 16/PC

Special lubricant for Aluminium extruded profile cutting

 

ADVANTAGES

•  Made of specially selected premium synthetic raw materials

• Vanishing: It does not leave any residue on ther profile after heat treatment.

 

  ​ 

AUXILIARY LUBRICATION

Baraldi Auxiliary lubricants are specially designed for Sealing and Anti-sticking/Anti-seizing capacities on contact surfaces: Piston/container and Container/mixer holders

 

B-TECH Paste 2102

 

ADVANTAGES

• Pigmented paste

• Enables high throughput

• Compatible with high working temperatures

 

DIE (PRE-HEATING)

Baraldi Lubricants provide the necessary protective film before the products are pre-heated in the oven

​

SPRAYGRAPH G30

​

Baraldi SPRAYGRAPH G30 is designed to provide a protective film before preheating in the oven

 

ADVANTAGES

• Dry lubricant aerosol

• protects the die 

• No fumes or steam in production during preheating 

• Easy and fast application 

​​

​

Baraldi Extrusion products full Catalogue 

​​​​​​​​​​​